Casio Watch AMW700B 1AV User Manual

MO0606-EA  
Operation Guide 3054  
Getting Acquainted  
Congratulations upon your selection of this CASIO watch. To get the most out of your  
purchase, be sure to read this manual carefully.  
About This Manual  
Button operations are indicated using the letters shown  
in the illustration.  
Each section of this manual provides you with the  
information you need in order to perform operations in  
each mode. Further details and technical information  
can be found in the “Reference” section.  
Caution!  
Your watch is shipped with it Auto Display feature (which continually changes the  
contents of the digital display) turned on. Calibration signal reception is disabled while  
Auto Display is turned on.  
Press any button to turn off Auto Display and return to the Timekeeping Mode.  
World Time Mode  
Countdown Timer Mode  
General Guide  
Press C to change from mode to mode.  
In any mode (except when a setting screen is on the display), press B to illuminate  
the display.  
Timekeeping Mode  
Press C.  
Alarm Mode  
Stopwatch Mode  
Radio-controlled Atomic Timekeeping  
Month Day  
Manual Receive  
This watch receives a time calibration signal and updates  
its time setting accordingly.  
Supported time calibration signals: United States (Fort  
Collins), England (Rugby).  
PM  
indicator  
Manual receive lets you start a time calibration receive operation with the press of a  
Year  
button. For more information, see To perform manual receive.  
Important!  
When getting ready to receive the time calibration signal, position the watch as  
shown in the nearby illustration, with its 12 o'clock side facing towards a window.  
Make sure there are no metal objects nearby.  
Current Time Setting  
This watch adjusts its time setting automatically in  
accordance with a time calibration signal.You can also  
perform a manual procedure to set the time and date,  
when necessary.  
The first thing you should do after purchasing this watch  
is to specify your Home City (the city where you  
normally will use the watch). For more information, see  
To specify your Home City”.  
Day of week  
Home Time  
12 oclock  
(Hour : Minutes Seconds)  
or  
When using the watch outside the areas covered by the time signal transmitters, you  
will have to adjust the current time setting manually as required. See Timekeeping”  
for more information about manual time settings.  
The U.S. time calibration signal can be picked up by the watch while in North  
America. The term North Americain this manual refers to the area that consists of  
Canada, the continental United States, and Mexico.  
Make sure the watch is facing the right way.  
Proper signal reception can be difficult or even impossible under the conditions listed  
To specify your Home City  
below.  
1. In the Timekeeping Mode, hold down A until the city  
code starts to flash, which indicates the setting screen.  
2. Press D(east) and B(west) to select the city code you  
want to use as your Home City.  
l
l l  
l
l
l l  
Time calibration signal reception is supported when  
any one of the city codes shown in the table below is  
selected as your Home City.  
l l  
l
l
Inside or  
among  
buildings  
Inside a  
vehicle  
Near  
Near a  
Near high-  
tension  
Among or  
behind  
mountains  
City code  
household  
appliances,  
office  
construction  
site, airport,  
or other  
U.S. Signal  
U.K. Signal  
power lines  
City City  
City City  
City City  
Code Name  
YWG Winnipeg LIS Lisbon  
City City  
Code Name  
ATH Athens  
Code Name  
Code Name  
equipment,  
or a mobile  
phone  
sources of  
electrical  
noise  
HNL Honolulu  
ANC Anchorage CHI Chicago LON London  
YVR Vancouver MIA Miami MAD Madrid  
LAX Los Angeles YTO Toronto PAR Paris  
MOW Moscow  
Signal reception normally is better at night than during the day.  
Time calibration signal reception takes from two to seven minutes, but in some  
cases it can take as long as 14 minutes. Take care that you do not perform any  
button operations or move the watch during this time.  
YEA Edmonton  
DEN Denver  
NYC New York ROM Rome  
YHZ Halifax BER Berlin  
MEX Mexico City YYT St. Johns STO Stockholm  
3. Press A to exit the setting screen.  
Important!  
Normally, your watch should show the correct time as soon as you select your Home  
City code. If it does not, it should adjust automatically after the next auto receive  
operation (in the middle of the night).You can also perform manual receive or you  
can set the time manually.  
The watch will receive the time calibration signal automatically from the applicable  
transmitter (in the middle of the night) and update its settings accordingly. For  
information about the relationship between city codes and transmitters, see Home  
City Codes and Transmitters.  
Under factory default settings, auto receive is turned off for all of the following city  
codes: HNL (Honolulu), ANC (Anchorage), ATH (Athens), and MOW (Moscow). For  
details about turning on auto receive for these city codes, see To turn auto receive  
on and off.  
The time calibration signal the watch will attempt to pick up depends on its current  
Home City code setting as shown below.  
Home City Codes and Transmitters  
Home City Code  
Transmitter  
Frequency  
HNL*, ANC*,YVR,  
LAX,YEA, DEN, MEX,  
YWG, CHI, MIA,YTO,  
NYC,YHZ,YYT  
Fort Collins, Colorado  
(the United States)  
60.0 kHz  
LIS, LON,  
MAD, PAR, ROM, BER, Rugby (England)  
60.0 kHz  
STO, ATH*, MOW*  
* The areas covered by the HNL, ANC, ATH, and MOW city codes are quite far from  
the time calibration signal transmitters, and so certain conditions may cause  
problems with signal reception.  
You can disable time signal reception, if you want. See To turn auto receive on and  
offfor more information.  
See the maps under Reception Rangesfor information about the reception ranges  
of the watch.  
If you are in an area that does not use Daylight Saving Time (summertime), turn off  
the DST setting.  
Reception Ranges  
U.K. Signal  
1,500 kilometers  
U.S. Signal  
2,000 miles  
(3,000 kilometers)  
Time Calibration Signal Reception  
There are two different methods you can use to receive the time calibration signal:  
auto receive and manual receive.  
Rugby  
600 miles  
(1,000 kilometers)  
Auto Receive  
Fort Collins  
With auto receive, the watch receives the time calibration signal automatically up to  
six times a day. When any auto receive is successful, the remaining auto receive  
operations are not performed. For more information, see About Auto Receive.  
500 kilometers  
1
 
Operation Guide 3054  
Countdown Timer  
You can set the countdown timer within a range of one to  
Timekeeping Mode time  
(Hour : Minutes Seconds)  
Alarm Operation  
60 minutes. An alarm sounds when the countdown  
The alarm sounds at the preset time for about 10 seconds (in all modes), or until you  
reaches zero.  
stop it by pressing any button.  
All of the operations in this section are performed in the  
Countdown Timer Mode, which you enter by pressing  
C.  
To test the alarm  
In the Alarm Mode, hold down D to sound the alarm.  
To turn the daily alarm and the Hourly Time Signal on and off  
In the Alarm Mode, press D to cycle through the settings shown below.  
Alarm On Indicator / Hourly Time Signal On Indicator  
Minutes  
Seconds  
To set the countdown start time  
1. While the countdown start time is on the display in the Countdown Timer Mode,  
hold down A until the current countdown start time starts to flash, which indicates  
the setting screen.  
If the countdown start time is not displayed, use the procedure under To use the  
countdown timerto display it.  
Alarm Off  
Signal Off  
Alarm On  
Signal Off  
Alarm Off  
Signal On  
Alarm On  
Signal On  
2. While a setting is flashing, use D (+) and B () to change it.  
3. Press A to exit the setting screen.screen.  
The alarm on indicator and the Hourly Time Signal on indicator are shown on the  
display in all modes while these functions are turned on.  
To use the countdown timer  
Press D while in the Countdown Timer Mode to start the countdown timer.  
When the end of the countdown is reached, the alarm sounds for 10 seconds or until  
you stop it by pressing any button. The countdown time is reset automatically to its  
starting value after the alarm stops.  
Press D while a countdown operation is in progress to pause it. Press D again to  
resume the countdown.  
To stop a countdown operation completely, first pause it (by pressing D), and then  
press A. This returns the countdown time to its starting value.  
Calibration signal reception is disabled while a countdown timer operation is in  
progress.  
Timekeeping  
Use the Timekeeping Mode to set and view the current time and date.  
When setting the time, you can also configure settings for the City Code, the DST  
setting, the 12/24-Hour Format, Year, Month, Day, the Language setting, and the  
Month/Day display format, and you can specify the screens that are displayed in the  
Timekeeping Mode.  
Pressing D in the Timekeeping Mode will display the Last Signal screen.  
CurrentTime and Date screen  
Last Signal Screen  
Stopwatch  
The stopwatch lets you measure elapsed time, split times,  
Press D.  
Timekeeping Mode time  
(Hour : Minutes Seconds)  
and two finishes.  
The display range of the stopwatch is 59 minutes, 59.99  
seconds.  
The stopwatch continues to run, restarting from zero  
after it reaches its limit, until you stop it.  
Exiting the Stopwatch Mode while a split time is frozen  
on the display clears the split time and returns to  
elapsed time measurement.  
The stopwatch measurement operation continues even  
if you exit the Stopwatch Mode.  
Note  
This watch is capable of displaying text for the day of the week in any one of  
different languages (English, Spanish, French, Portuguese, German, Italian, Chinese,  
Russian, and Japanese).  
9
Setting the Time and Date  
Minutes Seconds  
All of the operations in this section are performed in the  
Stopwatch Mode, which you enter by pressing C.  
Make sure you select your Home City code before you change the current time and  
date settings. World Time Mode times are all displayed in accordance with the  
Timekeeping Mode settings. Because of this, World Time Mode times will not be  
correct if you do not select the proper Home City code before setting the time and  
date in the Timekeeping Mode.  
1/100  
seconds  
To measure times with the stopwatch  
Elapsed Time  
To set the time and date  
D
Start  
D  
Stop  
D  
Re-start  
D
A  
Clear  
1. In the Timekeeping Mode, hold down A until the city  
code starts to flash, which indicates the setting screen.  
2. Press C to change the flashing contents in the  
sequence shown below to select other settings.  
Stop  
Split Time  
A
A
D  
Stop  
D
Start  
A  
Split  
(SPL displayed)  
Split release  
Clear  
Two Finishes  
City code  
A
D
A  
Split release  
Display time of  
second runner.  
D
Start  
A  
Split  
12/24-Hour  
Format  
DST  
Seconds  
Hour  
Minutes  
Year  
City Code  
Stop  
Second r unner  
finishes.  
Clear  
First runner  
finishes.  
Display time of  
first runner.  
Language  
Month/Day Display Format  
Day  
Month  
3. When the setting you want to change is flashing, use B and/or D to change it as  
described below.  
Alarm  
After you set (and turn on) the daily alarm, the alarm tone  
sounds when the alarm time is reached.You can also turn  
on an Hourly Time Signal that causes the watch to beep  
for about one second every hour on the hour.  
All of the operations in this section are performed in the  
Alarm Mode, which you enter by pressing C.  
Screen:  
To do this:  
Do this:  
Timekeeping Mode time  
(Hour : Minutes Seconds)  
Change the city code  
Use D (east) and  
B (west).  
Standard Time Press D.  
),  
Cycle between auto DST (  
(
), and Daylight Saving Time (  
)
Toggle between 12-hour (12H) and 24-hour  
Press D.  
Press D.  
(24H) timekeeping  
Reset the seconds to  
Alarm on  
indicator  
Alarm time  
(Hour : Minutes)  
Change the hour, minutes, or year  
Use D (+) and B  
().  
Hourly time  
signal on  
indicator  
Change the month or day  
To set the alarm time  
Change the language  
ENG: English ESP: Spanish FRA: French  
POR: Portuguese DEU: German  
Use D and B.  
1. In the Alarm Mode, hold down A until the hour setting  
of the alarm time starts to flash, which indicates the  
setting screen.  
This automatically turns on the alarm.  
2. Press C to move the flashing between the hour and  
minute settings.  
ITA: Italian CHN: Chinese RUS: Russian  
JPN: Japanese  
Press D.  
Toggle the month/day display format between  
month/day (M/D) and day/month (D/M).  
See City Code Tablefor a complete list of available city codes.  
See the Day of the Week Listfor information on abbreviations used.  
) can be selected only while HNL, ANC, YVR, LAX, YEA, DEN,  
3. While a setting is flashing, use D (+) and B () to change it.  
When setting the alarm time using the 12-hour format, take care to set the time  
correctly as a.m. (A indicator) or p.m. (P indicator).  
Auto DST (  
MEX, YWG, CHI, MIA, YTO, NYC, YHZ, YYT, LIS, LON, MAD, PAR, ROM, BER,  
STO, ATH, or MOW is selected as the Home City code. For more information, see  
Daylight Saving Time (DST)below.  
4. Press A to exit the setting screen.  
4. Press A to exit the setting screen.  
3
 
Operation Guide 3054  
If you are in an area where proper time calibration signal reception is impossible, the  
Daylight Saving Time (DST)  
watch keeps time within 20 seconds a month at normal temperature.  
If you have problems with proper time calibration signal reception or if the time  
setting is wrong after signal reception, check your current city code, DST (summer  
time), and auto receive settings.  
Daylight Saving Time (summer time) advances the time setting by one hour from  
Standard Time. Remember that not all countries or even local areas use Daylight  
Saving Time.  
The time calibration signals transmitted from Fort Collins (the United States) or Rugby  
(England) includes both Standard Time and DST data. When the Auto DST setting is  
turned on, the watch switches between Standard Time and DST (summer time)  
automatically in accordance with the received time signal.  
The default DST setting is Auto DST (  
YEA, DEN, MEX, YWG, CHI, MIA, YTO, NYC, YHZ, YYT, LIS, LON, MAD, PAR,  
ROM, BER, STO, ATH, or MOW as your Home City code.  
If you experience problems receiving the time calibration signal in your area, it  
probably is best to switch between Standard Time and Daylight Saving Time  
(summer time) manually.  
The following are the initial factory defaults for these settings.  
Setting  
Initial Factory Default  
City code  
NYC(New York)  
) whenever you select ANC, YVR, LAX,  
DST (summer time)  
(Auto switching)  
(Auto receive)  
Auto receive  
Timekeeping  
Resetting the seconds to 00 while the current count is in the range of 30 to 59  
causes the minutes to be increased by 1. In the range of 00 to 29, the seconds are  
reset to 00 without changing the minutes.  
To change the Daylight Saving Time (summer time) setting  
1. In the Timekeeping Mode, hold down A until the city code starts to flash, which  
indicates the setting screen.  
The day of the week is displayed automatically in accordance with the date (year,  
2. Press C and the DST setting screen appears.  
month, and day) settings.  
The year can be set in the range of 2000 to 2099.  
3. Use D to cycle through the DST settings in the sequence shown below.  
The watchs built-in full automatic calendar makes allowances for different month  
lengths and leap years. Once you set the date, there should be no reason to change  
it except after you have the watchs battery replaced.  
Auto DST (  
)
DST off (  
)
DST on (  
)
The times for the Timekeeping Mode and all the city codes of the World Time Mode  
are calculated in accordance with each citys UTC differential.  
4. When the setting you want is selected, press A to exit the setting screen.  
The DST indicator appears to indicate that Daylight Saving Time is turned on.  
The UTC differential is a value that indicates the time difference between a  
reference point in Greenwich, England and the time zone where a city is located.  
The letters UTCis the abbreviation for Universal Time Coordinated, which is the  
world-wide scientific standard of timekeeping. It is based upon carefully maintained  
atomic (cesium) clocks that keep time accurately to within microseconds. Leap  
seconds are added or subtracted as necessary to keep UTC in sync with the Earths  
rotation.  
Reference  
This section contains more detailed and technical information about watch operation.  
It also contains important precautions and notes about the various features and  
functions of this watch.  
12-hour/24-hour Timekeeping Formats  
The 12-hour/24-hour timekeeping format you select in the Timekeeping Mode is also  
applied in all other modes.  
With the 12-hour format, the PM indicator (P) appears on the display for times in the  
range of noon to 11:59 p.m. and AM indicator (A) appears for times in the range of  
midnight to 11:59 a.m.  
With the 24-hour format, times are displayed in the range of 0:00 to 23:59, without  
any indicator.  
Auto Display  
Auto Display continually changes the contents of the digital display.  
To turn off Auto Display  
Press any button to turn off Auto Display. This returns to the Timekeeping Mode.  
To turn on Auto Display  
In the Timekeeping Mode, while holding down B, hold down D for about two  
seconds until the watch beeps.  
Illumination  
This watch has an EL (electro-luminescent) panel that causes the entire display to  
glow for easy reading in the dark. In any mode (except when a setting screen is on the  
display), press B to illuminate the display for about three seconds.  
Note  
Calibration signal reception is disabled while Auto Display is being performed.  
Auto Display cannot be performed while a setting screen is on the display.  
Illumination Precautions  
The electro-luminescent panel that provides illumination loses power after very long  
Button Operation Tone  
use.  
The button operation tone sounds any time you press one  
of the watchs buttons.You can turn the button operation  
tone on or off as desired.  
Illumination may be hard to see when viewed under direct sunlight.  
The watch may emit an audible sound whenever the display is illuminated.  
This is due to vibration of the EL panel used for illumination, and does not indicate  
malfunction.  
Even if you turn off the button operation tone, the alarm,  
Hourly Time Signal, and Countdown Timer Mode alarm  
all operate normally.  
Illumination automatically turns off whenever an alarm sounds.  
Frequent use of illumination runs down the battery.  
To turn the button operation tone on and off  
In any mode (except when a setting screen is on the  
Day of the Week List  
MUTE indicator  
display), hold down C to toggle the button operation tone  
on (  
not displayed) and off (  
displayed).  
Sunday Monday Tuesday Wednesday Thursday Friday Saturday  
Since the C button is also the mode change button, holding it down to turn the  
button operation tone on or off also causes the watchs current mode to change.  
ENx  
ESP  
FRA  
POR  
DEU  
ITA  
CHN  
RUS  
JPN  
SUN  
DOo  
DIo  
DOo  
SON  
DOo  
oON  
LUN  
LUN  
SEx  
oON  
LUN  
TUE  
oAR  
oAR  
TER  
DIE  
oAR  
WED  
oIb  
oER  
QUA  
oIT  
oER  
THU  
JUE  
JEU  
QUI  
DON  
xIO  
FRI  
VIE  
VEN  
SEX  
FRE  
VEN  
SAT  
SaB  
SAo  
SaB  
SAo  
SAB  
is displayed in all modes when the button operation tone is turned off.  
Auto Return Features  
If you leave the watch with the Last Signal screen in the Timekeeping Mode for one  
or two minutes without performing any operation, it returns to the Current Time and  
Date screen in the Timekeeping Mode automatically.  
If you leave the watch in the Alarm Mode for two or three minutes without performing  
any operation, it returns to the Timekeeping Mode automatically.  
If you leave the watch with a flashing setting on the display for two or three minutes  
without performing any operation, the watch exits the setting screen automatically.  
CS  
QO  
BT  
SR  
YT  
QT  
SB  
City Code Table  
Scrolling  
B and D are used in various modes and setting screens to scroll through data. In  
most cases, holding down these buttons during a scroll operation scrolls through the  
data at high speed.  
City  
City  
UTC  
Other major cities in same time zone  
Code  
Differential  
PPG  
HNL  
ANC  
YVR  
LAX  
YEA  
DEN  
MEX  
YWG  
CHI  
Pago Pago  
Honolulu  
Anchorage  
Vancouver  
Los Angeles  
Edmonton  
Denver  
Mexico City  
Winnipeg  
Chicago  
11.0  
10.0  
09.0  
Papeete  
Nome  
Initial Screens  
San Francisco, Las Vegas,  
Seattle/Tacoma, Dawson City  
08.0  
07.0  
When you enter the World Time or Alarm Mode, the data you were viewing when you  
last exited the mode appears first.  
El Paso  
Radio-controlled Atomic Timekeeping Precautions  
The display of the watch is blank while an auto receive operation is in progress.  
Strong electrostatic charge can result in the wrong time being set.  
The time calibration signal is bounced off the ionosphere. Because of this, such  
factors as changes in the reflectivity of the ionosphere, as well as movement of the  
ionosphere to higher altitudes due to seasonal atmospheric changes or the time of  
day may change the reception range of the signal and make reception temporarily  
impossible.  
06.0  
Houston, Dallas/Fort Worth, New Orleans  
MIA  
Miami  
Montreal, Detroit, Boston,  
Panama City, Havana, Lima, Bogota  
YTO  
NYC  
CCS  
YHZ  
YYT  
RIO  
Toronto  
05.0  
04.0  
New York  
Caracas  
Halifax  
St. Johns  
Rio De Janeiro  
Praia  
La Paz, Santiago, Port Of Spain  
03.5  
03.0  
01.0  
Sao Paulo, Buenos Aires, Brasilia, Montevideo  
Even if the time calibration signal is received properly, certain conditions can cause  
RAI  
the time setting to be off by up to one second.  
LIS  
LON  
MAD  
PAR  
ROM  
BER  
STO  
ATH  
CAI  
JRS  
MOW  
JED  
THR  
DXB  
KBL  
KHI  
Lisbon  
London  
Madrid  
Paris  
Rome  
Berlin  
Stockholm  
Athens  
Cairo  
Jerusalem  
Moscow  
Jeddah  
Tehran  
Dubai  
The current time setting in accordance with the time calibration signal takes priority  
over any time settings you make.  
+00.0  
Dublin, Casablanca, Dakar, Abidjan  
The watch is designed to update the date and day of the week automatically for the  
period January 1, 2000 to December 31, 2099. Setting of the date by a time  
calibration signal cannot be performed starting from January 1, 2100.  
This watch can receive signals that differentiate between leap years and non-leap  
years.  
+01.0  
Milan, Amsterdam, Algiers, Hamburg, Frankfurt, Vienna  
Helsinki, Istanbul, Beirut, Damascus,  
Cape Town  
+02.0  
+03.0  
Though this watch is designed to receive both time data (hour, minutes, seconds)  
and date data (year, month, day), certain signal conditions can limit reception to time  
data only.  
Normally, the signal reception date shown by the Receive Mode is the date data  
included in the received time calibration signal. When only time data is received,  
however, the Receive Mode shows the date as kept in the Timekeeping Mode at the  
time of signal reception.  
Kuwait, Riyadh, Aden, Addis Ababa, Nairobi  
+03.5  
+04.0  
+04.5  
+05.0  
+05.5  
Shiraz  
Abu Dhabi, Muscat  
Kabul  
Karachi  
Delhi  
Male  
Mumbai, Kolkata  
DEL  
4
 
Operation Guide 3054  
City  
Code  
DAC  
RGN  
BKK  
HKG  
BJS  
UTC  
Differential  
+06.0  
+06.5  
+07.0  
City  
Other major cities in same time zone  
Dhaka  
Yangon  
Bangkok  
Hong Kong  
Beijing  
Colombo  
Jakarta, Phnom Penh, Hanoi, Vientiane  
+08.0  
Singapore, Kuala Lumpur, Manila, Perth, Ulaanbaatar  
TPE  
SEL  
TYO  
ADL  
GUM  
SYD  
NOU  
WLG  
Taipei  
Seoul  
Tokyo  
Adelaide  
Guam  
Sydney  
Noumea  
Wellington  
+09.0  
+09.5  
+10.0  
Pyongyang  
Darwin  
Melbourne, Rabaul  
+11.0  
+12.0  
Port Vila  
Christchurch, Nadi, Nauru Island  
Based on data as of December 2005.  
5
 

Bertazzoni Range MLS0GNU7X5AUA User Manual
Bodum Coffeemaker 11142 User Manual
Boston Acoustics Speaker CS 270 User Manual
Briggs Stratton Portable Generator 01933 1 User Manual
Brocade Communications Systems Switch 53 1001761 01 User Manual
Brother Fax Machine FAX2580C 2480C User Manual
Cabletron Systems Switch 8H02 16 User Manual
Canon Camera Lens 17 55mm User Manual
CFM Corporation Indoor Fireplace UVDR36C User Manual
Chauvet Video Gaming Accessories CHS 50 User Manual